- Register

 
 

Home >EGE Proximity switch for Ex zone 0/20

Editor's Pick


ARTICLE

EGE Proximity switch for Ex zone 0/20

10 January 2019

With the IGEX20a inductive proximity switch EGE provides a very compact sensor for zone 0/20 hazardous areas that can be used without additional amplifiers.

IGEX20a is certified according to ATEX and IECEx. The IECEx certification simplifies worldwide use of the sensors. Certified for use in Ex zones 0 and 20, the proximity switches can be employed in hazardous areas with gas or dust atmospheres, for example in gas stations and facilities with gas-conveying parts. The switching function is indicated by an LED on the back of the device.

The sensors are available in an M12, M18, or M30 design. Flush installation provided, the nominal switching distances are 2 mm, 5 mm, and 10 mm, depending on the design. The proximity switches are connected via a 2 m PUR cable. EGE supplies the sensors with different cable lengths on request.

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED