- Register

 
 

Home >CONTROLS>Flow Control
PRODUCTS & SERVICES

1/5     (1 to 20 of 87)

15 March 2018

M1000, M2000 and M5000 mag flow meters from Badger Meter are now WRAS approved for measuring potable water to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. WRAS approval is also accepted in other countries throughout the world as a safety standard.

[Read More]


13 April 2018

Suitable for power sensitive fluidic control in oil tool, aerospace and high performance automotive applications, or wherever control systems would benefit from reduced power consumption and lower heat generation, is a new new Latching Solenoid Valve from Lee Products. 

[Read More]


03 January 2018

Alicat Scientific’s MCE mass flow controllers have been integrated into MDC Vacuum Products’ XpressStick MFC Gas Stick. With precision control of gas flows of up to 20SLPM and onboard display, Alicat’s MCE provides gas programming functionality to the gas connection module, which links pressurised gas inputs to vacuum chambers.

[Read More]


21 November 2017

Alicat Scientific’s MCE mass flow controllers have been integrated into MDC Vacuum Products’ XpressStick MFC Gas Stick. With precision control of gas flows of up to 20SLPM and onboard display, Alicat’s MCE provides gas programming functionality to the gas connection module, which links pressurized gas inputs to vacuum chambers.

[Read More]


13 November 2017

ABB has released an updated version of its comprehensive handbook outlining the basic principles behind flow measurement in industrial processes. Titled “Industrial flow measurement: Basics and practice”, it explains the key methods and factors to consider when measuring industrial flow rate and associated applications.

[Read More]


15 November 2017

By preventing incorrect valve line-up with the installation of a valve management system, valve operation specialist Sofis has ensured that tank storage provider Oiltanking Malta has significantly reduced its operational and financial risk exposure.

[Read More]


09 October 2017

New from Omega, the FMC-5000 Series of Coriolis Flow Meters are designed to meet the challenges of measuring mass fluids that can be corrosive or difficult to measure.

[Read More]


29 August 2017

Rotork has received an order for 220 pneumatic actuators for the NASR Phase II Full Field Development Project in the UAE.

[Read More]


29 August 2017

Dixon will be showcasing its range of hygienic fittings and actuated valves along with a carousel of hygienic hoses assemblies offering odourless and taste free properties suitable for liquid foodstuffs AT PPMA 2017.

[Read More]


28 June 2017

New from Omega the FTB700-S Series turbine meters that have a unique system of precisely-machined helical rotors and high-quality jewel bearings.

[Read More]


28 June 2017

New from Omega, the FMC-5000 Series of Coriolis Flow Meters are designed to meet the challenges of measuring mass fluids that can be corrosive or difficult to measure.

[Read More]


22 June 2017

Choosing the correct design and specification of valve for a process can save costs, reduce downtimes and minimise product loss or contamination.

[Read More]


20 June 2017

Featuring an I/O-Link interface and digital display, EGE has launched the new SNS 552 flow sensor for flow measurement of water and water-based media in large pipes.

[Read More]


05 June 2017

To help simplify Eni Norge’s valve processes on the Goliat Field oilfield, prior to its merger with Netherlocks and subsequent name change to Sofis, Smith Flow Control developed a custom-built operating panel that enhances safety and increases efficiency by moving the control and operation of Eni Norge’s large number of valves to a single, safe location.

[Read More]


08 May 2017

New from Omega the FMC-5000 Series of Coriolis Flow Meters are designed to meet the challenges of measuring mass fluids that can be corrosive or difficult to measure.

[Read More]


03 May 2017

The latest addition to Badger Meter USA’s portfolio, the RCT1000 Coriolis mass flow meter is suited to the precise measurement of high viscosity fluids, aggressive media and contaminated fluids as well as high density gases, whilst maintaining a wide turndown ratio.

[Read More]


20 April 2017

Alicat Scientific has expanded the communications protocol offerings on its line of mass flow controllers for vacuum coating applications, adding EtherNet/IP and DeviceNet. Alicat’s MCE-Series and MCV-Series mass flow controllers ensure the optimal coating environment in vacuum chambers, maintaining product integrity in vacuum deposition.

[Read More]


21 April 2017

Hedland variable area flow meters give a clear visible indication of hydraulic line health during operation, without the dangers of a person coming in close contact with operating machinery. A higher-than-usual flow reading may indicate a significant leak while and lower-than-usual flow reading may indicate a possible line blockage.

[Read More]


20 March 2017

Bifold offers configurable valve control products, simplified for ease of selection with the highest safety factors and reduced spares requirements, offering the highest flow at the lowest cost, with reported cost savings of 22-39%.

[Read More]


09 March 2017

Alicat Scientific has added backlighting as a standard feature on monochrome LCD displays for its core range of mass flow meters, mass flow controllers and pressure controllers. The backlighting illuminates Alicat’s full-information, menu-driven, multi-parameter LCD display screens for easy reading, regardless of lighting conditions.

[Read More]


1/5     (1 to 20 of 87)

FEATURES

12 April 2017

Mark Lilley, Field Segment Manager, Hygienic - Food and Beverage for Bürkert Fluid Control Systems, looks at the best way to implement an automation project and the benefits it can deliver.

[Read More]


20 February 2017

Steve Busby, business development director at Oxford Flow discusses how innovations in valve design could help tackle some of the perennial problems in pressure regulation in an industrial setting

[Read More]


19 October 2016

Ian Webster, field segment manager, hygienic processing pharmaceutical at Bürkert Fluid Control Systems, looks at the specific requirements of modern hygienic fluid control applications and how they can be achieved.

[Read More]


16 January 2015

Since its invention in the early 1960s the solenoid has seen a number of developments that have enabled it to provide control over a wide range of applications. From water and gas handling to hygienic and micro fluidic applications, each has its own challenges. Paul Trevitt, operations & engineering manager for Bürkert UK & Ireland, reports

[Read More]


15 September 2014

The International Featured Standard (IFS) Food is an internationally recognised certification intended to encourage consumer confidence and enhance the brand perception of companies involved in food production. It is argued that achieving the required standard can improve food safety and quality while also streamlining processes and improving efficiency. Marc Klingler, segment manager for Bürkert Fluid Control Systems, looks at the areas which may require specialist attention.

[Read More]


SPONSORED CONTENT

VIDEOS OF THE MONTH