- Register

 
 

Home >MACHINE BUILDING & ENGINEERING>I/O Systems
PRODUCTS & SERVICES

1/2     (1 to 20 of 30)

13 September 2018

one of the recent releases from ifm electronic is simple radio-frequency identification over IO-Link. With the largest offering of IO-Link sensors on the market, founder member ifm electronic has also been supplying RFID systems for several years, so it makes sense to combine the technologies.

[Read More]


06 August 2018

Balluff will be showcasing what are reported to be the industry's first machine mount, IP69K protection rated, ECOLAB certified distributed I/O modules powered by EtherNet/IP, PROFINET, and IO-Link.

[Read More]


30 April 2018

I/O communication modules from Conta-Clip's GSM-PRO series provide easy-to-use and economic solutions for remote monitoring, control, and maintenance of distributed applications via mobile networks. Now, the connection technology specialist replaces the first generation with the new, same-size versions GSM-PRO2E and GSM-PRO2E-GPS.

[Read More]


16 August 2017

Omron has added a comprehensive range of IO-Link products to its extensive automation platform, providing users with a convenient and dependable option for implementing complete IO-Link solutions.

[Read More]


29 June 2017

The new Ethernet IO modules from Pepperl+Fuchs support all common Ethernet protocols, such as PROFINET, EtherNet/IP, and EtherCAT, in a single device.

[Read More]


06 July 2017

Eaton is expanding its SmartWire-DT intelligent wiring and communication system with the addition of a range of compact IP67 I/O block modules.

[Read More]


22 July 2016

IO-Link actuator/sensor hubs from Balluff feature eight ports for 16 in-/outputs. They allow for example signals from up to 16 switching sensors to be collected from a distance of up to 20 m so that they can be made available to the machine controller via IO-Link and an IO-Link master using a simple 3-conductor cable. Brand new in the market are versions with an expansion port.

[Read More]


18 February 2016

Red Lion Controls has announced availability of its new rugged E3 I/O module platform, a set of 17 high-density I/O modules with hardened metal enclosures and powerful communication options. This versatile platform marks Red Lion’s first rugged I/O modules configurable using Crimson 3.0 software.

[Read More]


19 February 2016

HanOnBoard is a connector technology from Harting which can replace standard discrete wiring by allowing power I/O connectors to be mounted and connected directly onto the printed circuit board (PCB).

[Read More]


30 November 2015

Siemens has developed extremely compact I/O (input/output) modules for AS-Interface with widths of just 17.5 and 22.5mm. The new AS-i SlimLine compact modules are just half the width of the predecessor devices, saving space in the control cabinet and distributed control boxes.

[Read More]


30 November 2015

Specialist in signal transmission solutions for mission critical applications, Beldon has introduced new LioN-Power Active I/O modules.

[Read More]


20 November 2015

At the SPS IPC Drives trade show smart automation specialist, Murrelektronik will highlight the newest member of the Emparro premium power supply family: a three-phase, 40A version.

[Read More]


01 June 2015

With the IXXAT Safe portfolio of ready-made safety I/O modules and safety protocol software, HMS Industrial Networks offers TÜV-certified solutions for implementing secure communication into industrial devices.

[Read More]


26 February 2015

The Axioline F family of I/O products designed for installation in control cabinets is being expanded further: Along with new I/O components and function modules, the devices can now be operated on additional key networks.

[Read More]


16 June 2014

Schneider Electric has released a new I/O family for its Foxboro Evo process automation system. The Foxboro Compact 200 Series I/O fieldbus modules support more I/O modules in less space, reducing footprint up to 50% and offering significant potential for cost savings.

[Read More]


06 June 2014

Sensor/actuator hubs with IO-Link interface from Balluff help save time and money in the installation, maintenance and operation of machines and equipment.

[Read More]


07 May 2014

The new IO-Link SmartLight from Balluff is equipped with all features for fundamentally revolutionising the signal light sector. It is the first light that can be flexibly adapted to nearly every requirement without complex configuration via hardware.

[Read More]


24 April 2014

Sensor/actuator hubs with IO-Link interface from Balluff help save time and money in the installation, maintenance and operation of machines and equipment.

[Read More]


07 March 2014

With the latest addition to Festo's CPX Modular Automation Platform, the CPX-2ZE2DA-PI Counter Module, system builders can now incorporate counting capability simply by plugging a CPX Counter Module directly into their CPX system.

[Read More]


20 March 2014

B&R now includes an analogue HART input module and a HART output module in its series of X20 communication modules.

[Read More]


1/2     (1 to 20 of 30)

FEATURES

17 January 2013

Developments to the Sysmac automation system containing several recently patented innovations have been rolled out throughout Europe. Andy Pye was in Barcelona for the launch

[Read More]


06 November 2012

Distributed I/O systems connected to an industrial network allow I/O data to be spread across the machine and outside the cabinet, reducing the total component and hardware costs of the system. Will Healy III, a network and connectivity market manager for Balluff North America, is your guide..

[Read More]


SPONSORED CONTENT

1/1     (1 to 11 of 11)

18 April 2017

Flexible CNC systems and solutions Boasting the widest range of CNC systems in the industry, FANUC provides everything you will ever need for your CNC.

[Read More]


18 April 2017

Short cycle times, consistent parts quality FANUC ROBOSHOT takes state-of-the-art CNC precision technology from turning and milling and applies it to electric injection moulding.

[Read More]


18 April 2017

Every part. When you need it. Where you need it. Outstanding quality and constant availability during the complete lifetime of your FANUC product make us a very reliable partner.

[Read More]


18 April 2017

The all-round CNC milling machine The new generation ROBODRILL vertical machining centre promises unrivalled quality and precision at great hourly rates.

[Read More]


18 April 2017

All your parts online That part you need is just a few clicks away. Register now for full 24/7 access to a huge selection of original equipment parts straight from the manufacturer.

[Read More]


18 April 2017

Boost productivity with your own personal maintenance strategy Regardless of what you manufacture, ensuring your machines exhibit maximum reliability is essential to your bottom line.

[Read More]


18 April 2017

From the smallest to the strongest industrial robot in the world With more than 100 models, FANUC offers the widest range of industrial robots in the world.

[Read More]


18 April 2017

Fast, accurate electrical discharge machining Where wire EDM is concerned, accuracy has traditionally come at the cost of speed.

[Read More]


18 April 2017

Upskill with FANUC and improve your productivity At the FANUC Academy we’re passionate about automation – and love nothing more than conveying that passion.

[Read More]


05 July 2016

The ATEX-Compliant embedded controller features a wide operating temperature range, wide DC power input and comprehensive I/O interfaces.

[Read More]


18 April 2017

Helping you meet your production needs Unlike conventional service and support offerings, FANUC works on the premise that because every customer’s needs are different

[Read More]


1/1     (1 to 11 of 11)

VIDEOS OF THE MONTH