- Register

 
 

Home>DRIVES & MOTORS>AC Motors>CONTA-CLIP
Home>MACHINE BUILDING & ENGINEERING>Connectors>CONTA-CLIP
Home>DRIVES & MOTORS>DC Motors>CONTA-CLIP
ARTICLE

CONTA-CLIP

04 April 2017

Cable entry system KDSClick The system has a modular design, consisting of only three types of basic components: frames, inlays and sealing sleeves.

Unlike conventional systems where the frame must be opened to insert the sealing sleeve and then screwed shut, CONTA-CLIP uses a dimensionally stable solution with a one-piece lightweight frame made from fibre-glass reinforced plastic.

Inlays can be clicked in to achieve the required size for the frame openings. This mechanism enables different frame configurations to be constructed for various cabling requirements.

There are 82 different sealing sleeves available for guiding multiple cables through the frame openings. After the corresponding cable is sheathed, the sleeves can be easily inserted (from the inside of the electrical cabinet towards the outside) into the openings that are framed by the inlays.

The sealing sleeves have a conical taper so that they can be easily pressed into the frame openings/inlays. There, they reliably seal up the spaces around the cable. They also provide a secure strain relief mechanism for cables outside of the housing. The sealing sleeves can also be easily released (by pressing inwards) if you need to add or change the cabling. Thus, you can change your cabling without completely removing the frame. This system can optionally be extended using a locking frame inside of the electrical cabinet. The locking frame secures the sealing sleeves from within so that they cannot be tampered with.

The frame is easy to install because is uses the same arrangement of mounting holes that are already standard for industrial connectors.

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED