Silicone adhesives defeat the heat
21 November 2017
Thermal Management? Two simple words but what do they mean? It is the hottest topic in electronics at the moment. Effective control of heat is an increasing concern among today's electronic device manufacturers and, as products become more compact, and powerful, the need to dissipate damaging heat effectively is greater than ever, as this article from Techsil outlines
For one, Chris Dilley, director of UK based adhesive specialist, Techsil, is taken aback at the pace of change. "Ten Years ago everybody wanted to seal this and IP rate that, today more than half our enquiries are for thermal management applications, which is good news for us as we’ve got over 20 different TIM (Thermal Interface Material) solutions now."
As electronics get smaller and hotter during brief moments of high service stress, what are you going to do with the build-up of heat? Too much heat can reduce service life and affect reliability. Air is a poor conductor so manufacturers have developed innovative thermally conductive silicone adhesives that can be robot dispensed to help quickly conduct heat away from the PCB to the heat sink (usually an aluminium case lid) or used as potting to act as a temporary heat store to allow heat to dissipate over time. Any air filled gaps, even microscopic, will inhibit the efficient transfer of heat.
Dilley comments: “Thermal pads are one solution that have been around for a while but we find that our customers prefer the flexibility of a paste, as no two surfaces are completely smooth and therefore often do not mate perfectly leaving air gaps. The paste is more forgiving and fills the gaps eliminating the air on the surface very well. Also it can be robot dispensed in intricate patterns. One customer we have worked with recently uses 6 spots of thermal paste on the reverse of the PCB positioned underneath the bigger components that get the hottest. The robot dispenses this consistently and accurately in just a few seconds on a high volume line.”
Silicones are very versatile and in particular have the advantages of being able to bond to difficult combinations of materials and reliability over a wide temperature range and in difficult environments. Used for potting their flexibility, when cured they provide excellent protection to sensitive electronics by absorbing mechanical vibration and thermal shock. Alternatively silicone greases can be used as gap fillers if there is a need to re-work the component at a future date.
Before choosing a thermally conductive adhesive it is important to consider a number of factors and not just selecting the one with the highest thermal conductivity. For example:
- What substrates are you bonding together? What is the size, dimensions and joint design?
- How strong does the bond need to be?
- How quickly do you need the adhesive to cure?
- How will it fit into your production line? What cure mechanism is acceptable in your process?
- For potting applications – what is the volume of the area to be potted? If large, a slower curing product could be better. How complex is the part? Will the adhesive flow easily around the part leaving no gaps?
“Application technology is really important because less is always more. The thicker the layer of thermal interface material, the more likely that this will actually limit the rate at which the heat is dissipated. This is because the heat sink itself will have a higher thermal conductivity than the paste, so the aim is to get heat to the heat sink as quickly as possible and this is achieved through thin BLT’s (Bond Line Thickness).
“Every application and every surface is different and that is why we like to get involved at the design stage to understand the substrates being used, the heat generated, how to eliminate the air and achieve a good BLT for the client and ultimately this means we can achieve a very efficient heat transfer and good thermal management solution.”
- As electronics get smaller and hotter during moments of stress, thermally conductive silicone adhesives conduct heat away from the PCB
- Silicones can bond difficult combinations of materials reliability over a wide temperature range and in difficult environments
- They can be robot dispensed in intricate patterns, consistently and accurately in just a few seconds on high volume lines