- Register

 
 

Home >POWER TRANSMISSION
PRODUCTS & SERVICES

1/30     (1 to 20 of 586)

25 February 2025

AUMA HAS expanded its PROFOX actuator series with the launch of the explosion-proof PROFOX-X, designed for safe operation in hazardous environments. Certified for ATEX and IECEx gas group IIC T4, including hydrogen applications, PROFOX-X ensures reliable performance in explosive atmospheres.

[Read More]


17 December 2024

NEW FROM igus, endurance material iglidur JPF is reported to be perfect for a wide range of wear-resistant polymer bearings as manufacturers seek to eliminate PFAS and PTFE before a potential ban in 2026.

[Read More]


17 December 2024

SKF AND DMG MORI have formed a joint development collaboration for large-scale implementation of an innovative SKF Insight Super-precision bearing system for machine tool spindles.

[Read More]


11 December 2024

AMONG THE most demanding and critical high technology applications are those where Ultra-High Vacuums (UHV) environments exist, such as particle accelerators, semiconductor manufacturing and advanced scientific research. UHV environments are typically defined by the need to handle pressures lower than about 1 x 10ˉ⁶ torr which present unique challenges for mechanical components.

[Read More]


22 April 2024

COSTLY MACHINE failures due to undetected defects in demanding applications could soon become a thing of the past with help form a new generation of two- and four-hole flange bearings with 'smart' features from igus. The lubrication-free high-performance plastic bearings are equipped with miniature wireless sensors that enable condition monitoring and aid predictive maintenance.

[Read More]


11 January 2024

CARTER MANUFACTURING has been invited to participate in ground breaking aviation hydrogen project, Future Engine Technology for the Control of Hydrogen (FETCH), a collaboration of the University of Bath/IAAPS, Cranfield University, along with Carter Manufacturing, Moog, Baker Hughes Druck and Curtiss-Wright.

[Read More]


06 December 2023

KEB AUTOMATION is expanding its product portfolio with the new COMBISTOP S1 spring-applied brake. The holding brake has a new, patented friction system.

[Read More]


06 December 2023

FOR THE first time igus has found a way to manufacture heavy-duty bearings made from two components of high-performance plastic, using the cost-effective injection moulding process. Until now, a plastic-based multi-layer structure was only possible using a winding which is more expensive for mass production.

[Read More]


06 December 2023

When a steel mill was experiencing regular failures of the bearings on its pilger mill, the plant turned to NSK for a robust and economic solution. By recommending bearings with 200% more life than the units they replaced, NSK provided the mill with annual savings of €159,933.

[Read More]


06 December 2023

BEARINGS & Drives has taken delivery of the first batch of bearings from CeramicSpeed that are destined to be retro fitted into fan motors in wind turbines.

[Read More]


07 December 2023

SKF HAS developed the first spherical roller bearings specifically designed for the food and beverage industry. These bearings with food-grade grease and seals have a longer service life than SKF open spherical roller bearings and raise relevant food safety standards in the food and beverage industry.

[Read More]


06 September 2023

AVAILABLE FROM Mclennan, Wittenstein’s new cynapse® smart gearbox combines built-in sensors with analysis and visualisation software to monitor significant gearbox threshold data that is communicated via IO-Link to PLCs as well as higher level IPCs/Gateways and Cloud systems for comprehensive IIoT integration. Data including acceleration, vibration, operating time, and temperature etc. can be evaluated as part of Industry 4.0 predictive maintenance.

[Read More]


01 May 2023

WAYNE ROSE has officially become the new director and CEO of the British Pump Manufacturers Association (BPMA), following the retirement of his longstanding predecessor, Steve Schofield.

[Read More]


01 May 2023

WITH THE Hydraulics for You (H4U) software platform and the ctrlX AUTOMATION toolkit, Bosch Rexroth has transferred the control functions of hydraulics, which are traditionally hardware-agnostic, into hardware-independent software modules. This enables the use of apps to access the functions.

[Read More]


07 March 2023

MATARA UK, specialist in automation, pneumatics and linear motion products, has released its very first Pneumatics Product Catalogue. The new 204 page catalogue features the company's air preparation range, solenoid valves and valve islands, pilot and mechanical valves, pneumatic cylinders (built in the UK), rodless cylinders, grippers, and ancillary equipment.

[Read More]


02 March 2023

STOBER HAS partnered with FVA-Workbench, the leading software solution for the calculation and parameter modelling of gear systems for faster, more efficient planetary gear unit design.

[Read More]


25 January 2023

IGUS IS accepting submissions for 'the manus award 2023', which the motion plastics specialist has hosted biannually for 20 years. The award honours the most creative, economical and sustainable applications of plastic plain bearings in industrial applications.

[Read More]


02 March 2023

The R26HT high torque gearhead is the latest addition to Portescap’s robust motor accessory portfolio and pairs perfectly with the company's existing 22mm brushless slotless motor technologies.

[Read More]


02 November 2022

DAVALL IS highlighting how its Spiradrive precision spiroid gear assembly can help users enable business growth.

[Read More]


21 October 2022

DESIGNED FOR applications that require long e-chain travels, igus has launched a new drive-chain that offers almost limitless long travel distances, with high dynamics and long running times. Reported to be world’s first energy chain with its own drive, it helps ensure significantly higher running times on extremely long travel distances because hardly any tensile loads or thrust forces act on the e-chain.

[Read More]


1/30     (1 to 20 of 586)

FEATURES

1/6     (1 to 20 of 119)

23 June 2025

Dave Walsha explains how custom gearboxes are engineered to support and enhance specialised machinery design and function

[Read More]


16 June 2025

Chris Diak and Robert Johansson make the safety case for electromechanical actuators over hydraulic cylinders

[Read More]


17 April 2025

Patrick Faulkner explores the importance of gear ratios in optimising performance and efficiency

[Read More]


10 June 2025

Engineers often have to choose beween selecting custom bearings tailored to their application or opting for readily available off-the-shelf solutions. Chris Johnson weighs up the pros and cons

[Read More]


12 February 2025

Simon Whitehouse explores evolving trends in the gearbox market and how behavior has shifted across various industry sectors

[Read More]


17 February 2025

David Strain explains how variable speed drives are enhancing pump energy efficiency and performance

[Read More]


11 November 2024

A critical yet often overlooked component in preventing downtime is the bearing – the small but vital part that keeps industrial operations running smoothly. Chris Johnson discusses the economic benefits of investing in high-quality bearings.

[Read More]


11 November 2024

Apex Dynamics UK has been praised by Cambridge Dynamics for the "seamless and transparent" implementation of its products into a new custom machine the specialist company produced for one of its customers.

[Read More]


19 August 2024

In a world first, NSK has introduced a new method of accurately predicting the lifespan of rolling bearings based on their size and the amount of non-metallic inclusions in the steel the bearings are made from, reports Charlie Kortens

[Read More]


27 August 2024

COST PRESSURE, ever-increasing customer requirements, stronger competition: The production industry faces major challenges. But how can one optimise production? Which strategies result in significant increases in production and reduced costs?

[Read More]


25 June 2024

Rotary Precision Instruments (RPI) UK chooses AF Series precision planetary gearboxes from Apex Dynamics

[Read More]


17 April 2024

Although martensitic stainless steels have been favoured for bearings in robot applications, their performance falls short of rising standards to prevent contamination in medical environments. Chris Johnson explains why ceramic high-precision bearings hold the answer

[Read More]


29 February 2024

Everybody is talking about digitalisation – and sometimes it is the simplest applications that demonstrate its power to transform. By opening a window to locate and calculate compressed air energy wastage in real time, production teams are saving up to 30% of their electricity costs, reports Charlie Walker

[Read More]


24 January 2024

CHRIS JOHNSON explains how miniature and instrument ball bearings can support Automated Test Equipment (ATE) advancement in such areas as control, instrumentation and metrology.

[Read More]


14 December 2023

Japh Humphries looks at common mistakes when selecting ball screws and how to avoid them

[Read More]


07 December 2023

Thomas Marks looks at several issues that poor pump maintenance can lead to and outlines some of the key steps that can be taken to minimise the chance of them emerging

[Read More]


05 December 2023

Different materials make gears suitable for the desired application. The key involves identifying the right recipe, says Brian Dengel

[Read More]


09 October 2023

Simon Gass outlines the key application and specification questions engineers should consider when assessing multi axis electric motion control solutions

[Read More]


12 October 2023

JOSH ROBERTS explores the range of linear motion technologies available today and guides us through the design considerations that will result in the best selection for your application.

[Read More]


21 August 2023

Mike Gulliford looks at the advantages and applications of hypoid gearboxes

[Read More]


1/6     (1 to 20 of 119)

SPONSORED CONTENT

1/10     (1 to 15 of 139)

24 June 2016

Plastic and metal plugs, oil breather caps and level indicators for hydraulic systems comply with Health and Safety Requirements according to 94/9/EC ATEX European Directive (explosive atmospheres) for equipment in Group II, category 2GD.

[Read More]


15 February 2013

When searching the web for a suitable industrial gearbox and geared motor repair centre within the UK it appears that the customer is spoilt for choice. However Rossi UK believe that very often, this choice is limited, as many of these repair centres are not authorised by the OEM and therefore the repair is carried out at higher risk to end user and could lead to incurring additional costs.

[Read More]


11 March 2013

Solid-state Ultrasonic Fuel Flow Sensor capable of monitoring bi-directional fuel flow rate up to 8l/min. Compact, lightweight and extremely accurate

[Read More]


20 September 2017

UNIVERSAL SI and SMI worm gear units from NORD DRIVESYSTEMS provide a high power density and are extremely compact.

[Read More]


31 January 2018

The alpha Value Line is universally suitable: it represents the most economical solution whatever the requirements for driving any axis in virtually any industry.

[Read More]


13 May 2016

Looking for a compact low cost linear positioning stage? LG Motion has the answer with XSlide™

[Read More]


12 May 2016

New Compact Linear Motor available from LG Motion

[Read More]


18 February 2013

If you need a custom design, Exlar’s Application Engineering department will work with you to engineer a solution specifically tailored to your application.

[Read More]


05 August 2014

MB50 fans. Mancoolers from stock! 110v and 240V

[Read More]


18 April 2017

Every part. When you need it. Where you need it. Outstanding quality and constant availability during the complete lifetime of your FANUC product make us a very reliable partner.

[Read More]


27 October 2021

The pressure transmitters of the 33X series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band.

[Read More]


10 January 2017

Compact OEM Drive for all motor types – Induction, Brushless DC, Permanent Magnet & Synchronous Reluctance.

[Read More]


10 January 2017

The Elevator Variable Frequency Drive is the 2nd generation dedicated elevator drive from Invertek Drives, designed to provide smooth, reliable carriage control in all elevator applications.

[Read More]


24 June 2016

Handwheels, knobs, lever handles, adjustable levers and handles conceived for a broad spectrum of applications, typical of new market segments, Ergostyle® elements are destined to hospital and medical equipment, scientific instruments, laboratory fittings, office furniture, leisure and sporting equipment, and, generally, whenever aesthetics and user-friendliness are key requirements for the market success of the product.

[Read More]


31 January 2018

Cymex Sizing Software allows you to design the entire drive train (application + transformation + gearbox + motor) easily and more reliably than ever before.

[Read More]


1/10     (1 to 15 of 139)

VIDEOS OF THE MONTH