MAREK LUKASZCZYK shares insights into the latest IE6 motor technology and its potential for the process industries.

[Read More]

As industries face the urgent need to embrace hydrogen, challenges such as flammability and material embrittlement need to be addessed. João Cardante reports

[Read More]

David Strain explains how variable speed drives are enhancing pump energy efficiency and performance

[Read More]

WITH AN output of up to 45,000 rolls per hour, the KGV-H industrial bread roll line from the Austrian manufacturer Koenig sets new performance standards — including a 50% higher throughput than the usual commercial bread roll lines.

[Read More]

Charlotte Stonestreet reports on the latest Controls, Drives & Automation webinar, sponsored by ABB, which explored the intricate relationships between circularity, sustainability, and energy efficiency. Providing the expertise on the day were Steve Hughes and Richard Gee

[Read More]

OVER THE past five decades, Nidec Drives' UK manufacturing facilities have undergone significant expansion and transformation. To maintain quality standards while continuing to serve customers, employees, and stakeholders efficiently, a new solution was required to tackle a critical challenge. Sue Clark reports

[Read More]

Marek Lukaszczyk explains how WEG’s new W23 Sync+ ULTRA motor utilises two technologies to reduce electrical losses for more sustainable operations and reduced total cost of ownership (TCO)

[Read More]

THE DEMAND for hand-held surgical power tools is at an all-time high due to significant surgical procedure backlogs and rising calls for elective and cosmetic surgeries.

[Read More]

Steve Hughes explores the role of input chokes in VFD applications, their benefits, and critical considerations for their implementation

[Read More]

Intelligent energy management, or the optimisation of energy use within an organisation, can help identify feasible ways to decarbonise operations, as Sam Tilley asserts

[Read More]

BUNNYRAY LARMOND looks at the vital role motors play in food and beverage processing, packaging, and preparation

[Read More]

FOR DESIGN applications that depend on motion, whether that’s a robot, a surgical power tool, or a satellite control system, miniature DC motors are commonly used thanks to their performance and compact footprint.

[Read More]

Charlotte Stonestreet sits down with Lee Turner, vice president of product and supplier management at Farnell to discuss trends and challenges in the world of industrial automation and control

[Read More]

Dipak Mane explains the importance of slot and pole selection for BLDC motor design

[Read More]

Delivering a safe and cost-effective cobot to the marketplace calls for intelligent design decisions, including an accurate, flexible, and responsive control strategy, cost-effective and optimally sized motors, and reliable and efficient power semiconductors, as outlined by Stein Nesbakk

[Read More]

LUKAS SCHMITZ, sustainability manager at KEB Automation, explains what sustainability means and why companies have a special responsibility towards people and nature, as well as looking at how drive technology plays a key role in promoting sustainability

[Read More]

DAVID STRAIN explains the three primary motor starting methods – direct online (DOL) starter, soft starter and variable speed drive (VSD) – and how to choose the best one.

[Read More]

As the latest generation of surgical power tools enable even greater capabilities to improve patient outcomes, there’s an increased need for their designers to consider the motion system that drives them, reports Nicole Monaco

[Read More]

NEW FROM WEG, the W23 Sync+ motor line is a hybrid innovation that combines permanent magnet (PM), ferrite or neodymium magnets and synchronous reluctance (SynRM) motor technologies, to provide higher efficiency across all speeds compared to conventional induction motors.

[Read More]

GERARD BUSH explores the most important considerations in motor selection for battery-powered applications, illuminating the path to a more sustainable and competitive future.

[Read More]

Datalogic’s Matrix 120™ is the smallest ultra compact industrial 2D imager on the market (23mm x 31mm x 45mm), along with small dimensions it also offers the flexibility of embedded Ethernet/Serial or USB/Serial connectivity.

[Read More]

Bifurcated axial fans. From stock.

[Read More]

Cyber dynamic line servomotors are the smart choice for limited space applications. These stainless deliver unparalleled performance, reliability and value from the smallest package.

[Read More]

Upskill with FANUC and improve your productivity At the FANUC Academy we’re passionate about automation – and love nothing more than conveying that passion.

[Read More]

The high corrosion resistance of stainless steel makes it one of the most demanded materials in many industrial sectors.

[Read More]

The prestigious Formula Renault 3.5 series has become an important feeder championship for Formula One in recent years with a string of current F1 racers having graduated from Renault’s ranks. Scuderia Toro Rosso drivers Jean Eric Vergne and Daniel Ricciardo, and reigning World Champion Sebastian Vettel are all products of Formula Renault 3.5.

[Read More]

These motors are excellently suited for uses with high hygienic requirements, for example in the food industry.

[Read More]

Our Industrial instrumentation products focus on components that measure and control the pressure and flow of liquids and gases.

[Read More]

If you need a custom design, Exlar’s Application Engineering department will work with you to engineer a solution specifically tailored to your application.

[Read More]

The POSIROT® range of PRAS (Analogue) and PRDS (Digital) Rotary Sensors are based around a contact free,
magnetically coupled encoder device which has been developed to work in rugged and harsh environments.

[Read More]

TD in-line silent range fans by S&P. the best product of this type on the market.

[Read More]

Series 758 is a Standard size 58mm diameter mounting Encoder with PPRs up to 30,000 (Also available in Stainless Steel as the series 858)

[Read More]

Series RXTXD is a DIN rail mountable unit, which can repeat, split or level-change encoder output signals

[Read More]

Choose from Eurocard motion controllers, panel mount, housed and intelligent drives – EtherCAT versions available.

[Read More]

Helping you meet your production needs Unlike conventional service and support offerings, FANUC works on the premise that because every customer’s needs are different

[Read More]