- Register

 
 

Home >MACHINE BUILDING & ENGINEERING>Materials & Components
PRODUCTS & SERVICES

1/12     (1 to 20 of 221)

28 September 2020

AFTER SOME respite in 2019, the global shortage of electronic components is likely to worsen in 2020 owing to a perfect storm of factors. Jonathan Parry from PEI-Genesis, explains how the shortage is driving counterfeits in mission-critical sectors, and what industry needs to do to fight the fakes.

[Read More]


24 September 2020

FOLLOWING INCREASED demand, Schaffner has reintroduced the FN2415 - single-phase EMC filter for control equipment with extended capabilities.

[Read More]


01 September 2020

KELLER AG für Druckmesstechnik was contacted by many leading medical equipment manufacturing companies who required high quality pressure measurement solutions for ventilators and monitoring medical gases during the coronavirus pandemic.

[Read More]


07 July 2020

Available via specialist distributor, Switchtec, the Smart-Q system from Sirena is a self-powered luminous & acoustic system for the management of queues at the entrance to shops, supermarkets, banks, and post offices.

[Read More]


06 July 2020

The latest technology from FOBA Laser delivers a single step solution for both bearing and laser mark inspection, ensuring that only good parts are marked and that the laser mark content is also correct.

[Read More]


27 April 2020

ESAB Welding & Cutting Products has launched Coreweld 55 LT H4, the newest product in its series of Coreweld metal cored wires designed for welding high strength steel (HSS).

[Read More]


25 February 2020

ESAB’s Dual Shield Prime is a family of seamless, low-hydrogen (H4) non-copper-coated flux cored wires that combat moisture absorption in humid environments, delivering impact toughness down to -60˚C.

[Read More]


10 February 2020

icotek’s new cable grommet KT-SC with peelable membrane rings has removable rings with graduated sealing areas.

[Read More]


16 January 2020

Flexible conduit system manufacturer, Flexicon, has launched an extended range of divisible corrugated conduits (dual split conduits), which can be easily retrofitted to protect vulnerable or existing cabling that may be susceptible to mechanical damage.

[Read More]


15 October 2019

Distributed by Switchtec, Sirena’s M-Line range of beacons and sounders has been updated to offer IP69K Ingress Protection, expanding potential uses and furthering honing the units to specific tasks and applications.

[Read More]


15 October 2019

Ruland now supplies quick clamping shaft collars with clamping levers. These adjustable levers mate a Ruland metric and international series inch shaft collar to a specially designed clamping lever, creating a shaft collar that requires no tools to install, remove, or reposition.

[Read More]


15 August 2019

Eaton has launched a new range of sounders and sounder beacons for the industrial process and control market that mitigates the risk of downtime from EMC discharge and overloaded loops on low voltage systems. Designed to IP69K, the X10 range is also able to withstand a jet wash of 5 bar at a temperature of 80°C.

[Read More]


14 August 2019

The main function of strong alkaline-based cleaning agents in the food and pharmaceutical industries is to remove organic contaminants, so that bacterial and fungal growth is prevented. This ensures that, food and medical products do not  become contaminated.

[Read More]


14 August 2019

Pneumatic cylinders often require running actuators as fast as possible without introducing excessive shock or vibration, which can become demanding. Engineers generally use an air cushion to avoid any lasting damage to the cylinder, however, adjustment of these end-position cushions requires time.

[Read More]


27 June 2019

The metal hoods and housings of Harting's Han B, EMC and M series now offer rear mounting options for contact inserts, a solution which greatly simplifies the preassembly of interfaces for control cabinets.

[Read More]


19 June 2019

New from Eclipse Magnetics is a high intensity hopper magnet designed for the plastics processing industries. Available in both easy clean and fixed options, the hopper guard can be used in most powder or granulate applications to remove ferrous and para-magnetic contamination, including sub-micron sized particles.

[Read More]


19 June 2019

Camozzi Automation’s Series 23 pneumatic cylinders feature ‘auto-cushioning’, reducing installation and commissioning time, to provide a cost-effective alternative to manually adjustable cylinders.

[Read More]


19 June 2019

Intrinsically safe ATEX- and IECEx-certified proximity switches from EGE's IGEXHa and IGEXPa series are suitable for use at extreme temperatures.

[Read More]


19 June 2019

A versatile, low-cost solution for process systems, pump and equipment protection, the rugged EconPLUS stainless steel perforated screen filter from Axium Process provides essential security in a wide variety of primary filtration applications.

[Read More]


19 June 2019

EAO’s Series 45 pushbuttons combine rugged construction with an attractive design – whether flush or raised mounted. Thanks to IP69K protection, penetration by dust and liquids is prevented even under the most adverse conditions.

[Read More]


1/12     (1 to 20 of 221)

FEATURES

17 February 2020

Dispensing robots enable the automation of the application of adhesives, potting compounds, encapsulants, sealants, form in place gaskets, temporary masking, lubricants and other liquids, fluids and pastes. Peter Swanson looks at considerations for choosing such a system

[Read More]


12 June 2018

Bollhoff’s Helicoil Plus range of threaded inserts has been developed to provide design engineers with additional security when using threaded fasteners in critical environments, particularly where loosening fasteners are at best an annoyance and at worst a potentially catastrophic occurrence

[Read More]


21 November 2017

Thermal Management? Two simple words but what do they mean? It is the hottest topic in electronics at the moment. Effective control of heat is an increasing concern among today's electronic device manufacturers and, as products become more compact, and powerful, the need to dissipate damaging heat effectively is greater than ever, as this article from Techsil outlines

[Read More]


23 June 2016

From engines to trim, toys to medical devices and instrumentation to valves, the Lee Spring capability to quickly create application specific springs and spring components is aiding the regrowth of UK manufacturing industry.

[Read More]


26 April 2016

Traditionally used for structures such as machine guards and work stations, the versatile MayTec profile system is lending itself to an increasingly wide variety of applications. David Rowe from distributor, Applied Automation Industrial Systems, explains how the company uses MayTec itself and how the market is growing

[Read More]


29 February 2016

According to Goss Springs, there are essentially just two ways to select an appropriate spring for the job...

[Read More]


22 April 2014

Many accidents are caused in factories and workshops by hose whip when disconnecting compressed air lines still under pressure. Craig Forrester, Stäubli Connectors UK manager, outlines how this danger can be eliminated.

[Read More]


21 June 2013

In modern production the clear trend toward modular systems and customised production necessitates short setup times, says Thomas Maier of Eisele Pneumatics

[Read More]


16 January 2013

What happens when a rotary connection must be inserted into a 1000BaseT Ethernet transmission line? Moog has extensive experience of designing slip rings for use with Ethernet networks

[Read More]


SPONSORED CONTENT

1/1     (1 to 12 of 12)

14 August 2015

TFC has a comprehensive range of threaded inserts for plastic, timber and metals.

[Read More]


24 June 2016

Plastic and metal plugs, oil breather caps and level indicators for hydraulic systems comply with Health and Safety Requirements according to 94/9/EC ATEX European Directive (explosive atmospheres) for equipment in Group II, category 2GD.

[Read More]


24 June 2016

Handles and knobs in RAL 9002 white colour with a smooth surface to make cleaning operations easier.

[Read More]


24 June 2016

Knobs, handles and adjustable feet in the special conductive technopolymer prevent the accumulation of electrostatic charge between bodies with different electric potential.

[Read More]


24 June 2016

Knobs and adjustable levers  made out of technopolymer with chrome surface. Resistant to sea water, detergents, acetone, ethyl alcohol, formic acid, chlorine solutions.  

[Read More]


24 June 2016

Knobs,handles and latches made out of self-extinguishing special technopolymer certified "V0" according to UL-94 V (Underwriters Laboratories) for use in public environments where flame-proof materials are required. 

[Read More]


24 June 2016

The high corrosion resistance of stainless steel makes it one of the most demanded materials in many industrial sectors.

[Read More]


24 June 2016

Handwheels, knobs, lever handles, adjustable levers and handles conceived for a broad spectrum of applications, typical of new market segments, Ergostyle® elements are destined to hospital and medical equipment, scientific instruments, laboratory fittings, office furniture, leisure and sporting equipment, and, generally, whenever aesthetics and user-friendliness are key requirements for the market success of the product.

[Read More]


28 September 2015

We stock a superb range of electrical products ranging from sockets to full lighting systems, and a whole host of things in between, to keep your business switched on.

[Read More]


24 June 2016

ELESA SAN LINE handles prevent the deposit of any undesired organism such as microbes, bacteria, mildew and fungi which are the major causes of unpleasant odours, discoloration, degradation and the formation of biofilm on surfaces and avoid their reproduction.

[Read More]


24 June 2016

Grip knobs, control knobs and handles represent the "SOFT" LINE.

[Read More]


14 August 2015

TFC has a comprehensive range of sheet metal products:

[Read More]


1/1     (1 to 12 of 12)

VIDEOS OF THE MONTH