- Register

 
 

Home >MACHINE BUILDING & ENGINEERING>Couplings
PRODUCTS & SERVICES

06 January 2022

BY LAUNCHING NearFi, Phoenix Contact introduces a new, innovative technology for contactless power and data transmission in the near-field range. This is the first technology to enable wireless, protocol-independent and latency-free Ethernet communication at speeds of up to 100Mbps across an air gap of up to 10mm, reports the company.

[Read More]


23 February 2017

Mechanical components manufacturer KTR Couplings has changed its name to KTR U.K. Ltd following a rebrand by its German parent company.

[Read More]


26 April 2016

An innovative new technique to cool high power electronics, efficiently and quietly, supported by the integrity of Stäubli fluid connectors, is the latest product from specialist in electronics cooling technology, Iceotope

[Read More]


21 July 2015

To prevent accidents when opening couplings under pressure, Smith Flow Control has added Bajolock patented couplers to its product portfolio.

[Read More]


21 July 2015

The modular design-oriented TOK system from Reich Kupplungen allows for the manufacture of tailor-made, yet cost-effective, couplings for a wide variety of test benches.

[Read More]


19 May 2015

New from Stäubli is a range of clean break, flat face, connectors that are suitable for all fluids, fully compatible with the well-known SCB range but much easier to connect.

[Read More]


16 June 2014

Offering precision honed bores, anti-vibration hardware, and opposing hardware on two-piece styles to ensure superior fit, alignment, and holding power, rigid couplings from Ruland are available in a wide variety of sizes, styles, and materials to suit the needs of packaging applications.

[Read More]


06 September 2013

Mayr Transmissions has launched a brand new torque measuring system based on its class leading ROBA-DS torsionally rigid backlash free disk coupling.

[Read More]


05 November 2012

It is reported that with Abssac’s Helical beam coupling product, users have been able to take their standard coupling designs to the next level, by incorporating features into the original shaft coupling design.

[Read More]


29 October 2012

For highly accurate systems found in industries such as test and measurement, medical, semiconductor, solar, and liquid handling, Ruland offers both single and double disc style couplings. Disc couplings have low inertia and are torsionally stiff making them suitable for precise zero-backlash systems with speeds up to 10,000rpm.

[Read More]


FEATURES

 border=
31 August 2021

Ensuring an efficient and reliable connection between two shafts is paramount for system reliability and to avoid any costly redesigns. David Lockett explores the considerations for designers when specifying couplings

[Read More]


SPONSORED CONTENT

1/1     (1 to 15 of 15)

12 January 2017

Mechanical-flexing couplings with T-Grid design for general purpose applications.

[Read More]


12 January 2017

Lightweight, advanced composite material design. Customized per specific applications.

[Read More]


12 January 2017

A replace-in-place designed coupling for quick installation and replacement.

[Read More]


12 January 2017

The original Autogard Torque Limiter with a trusted design that will disengage at a pre-set torque value.

[Read More]


12 January 2017

Torsionally soft, split-in-half, easy-maintenance coupling ensures on-site adjustability.

[Read More]


12 January 2017

A general purpose coupling offering easy installation and a wide range of shaft gaps.

[Read More]


12 January 2017

Material-flexing disc couplings with disc elements. Motor, engine and turbine-driven applications.

[Read More]


07 April 2016

MULTI MONT couplings have been built in series since 1958. This pluggable claw coupling that has been successfully proven over a number of decades has been permanently updated to the state of the art, and the MULTI MONT SELLA, MULTI MONT DEKA and MULTI MONT GIANT series nowadays cover a torque range from 40 to 1 000 000 Nm.

[Read More]


12 January 2017

Mechanical-flexing couplings with triple-crowned teeth. High-speed and high-torque applications.

[Read More]


07 April 2016

Test bench couplings are applied in miscellaneous test benches. By reason of manifold, specific requirements TOK system is designed according to the modular design concept, to be applicable on almost every engine test bench.

[Read More]


12 January 2017

The 400 Series has been designed to meet the need for a high-and low-speed, free-wheeling torque limiter.

[Read More]


12 January 2017

The 820 Series has been designed using the modular principle to accommodate high-torque, high- and low-speed applications with the flexibility to accommodate a wide range of torque settings.

[Read More]


07 April 2016

The ARCUSAFLEX coupling is a highly flexible flywheel coupling with an axial plug-in facility, providing a torsionally soft connection between an internal combustion engine and a driven machine.

[Read More]


15 December 2021

A response to the miniaturisation trend across industries, the Han® 1A has been designed to take up less installation space.

[Read More]


07 April 2016

The ArcuDent Toothcoupling is a double-jointed steel coupling. The teeth of the hubs and covers receive shape corrections to allow the highest misalignment capacity. It is a flexible, but nonetheless torsion-resistant coupling.

[Read More]


1/1     (1 to 15 of 15)

VIDEOS OF THE MONTH