- Register

 
 

Home >MACHINE BUILDING & ENGINEERING>Sensors
PRODUCTS & SERVICES

1/5     (1 to 20 of 98)

06 July 2020

The use of flow sensors which monitor both flow velocity and the temperature of mediums at critical locations in a major dairy processing plant have proved to be very significant in providing vital energy consumption data and ultimately achieving important cost savings.

[Read More]


06 July 2020

Dairy cooperative Arla Foods has created transparency over the energy consumed in cottage cheese production at its Falkenberg location using the Baumer Flex-Flow sensor, which is able to measure the temperature of the medium as well as the flow rate.

[Read More]


23 June 2020

Being able to predict and plan maintenance is the goal pursued by igus with its smart plastics solutions. Intelligent sensors, for example, measure the wear of energy chains, chainflex cables, slewing rings and linear guides. With the new icom.plus communication module, the customer can now decide in which form they would like to incorporate the acquired data from the sensors.

[Read More]


23 March 2020

Wind turbines rely on a variety of sensors to monitor the status of components and the ability of the turbine to operate efficiently and safely. The basic function of a wind turbine is to produce electricity from the wind. The power of the wind rotates the blades; this force is transferred to a generator to produce an electrical current.

[Read More]


10 January 2020

Carlo Gavazzi continues to extend its range of high-performance proximity inductive sensors with the launch of the stainless steel ICS08 4 wire in M8 with an operating distance up to 4mm.

[Read More]


15 October 2019

The digital ORT 230/240 series optical rotary torque sensors from Sensor Technology are reported to be ideal for applications that demand low torque and/or high bandwidth, providing precise, dynamic measurement of rotary and static torque of less than 100Nm and for bandwidths of up to 50kHz.

[Read More]


15 October 2019

At Motek 2019, the Schmersal Group is showcasing the first RFID-based safety sensor which has been designed in accordance with ATEX Directive 2014/34/EU and can be used in EX zones 2 (gas EX, category 3G) and 22 (dust EX, category 3D).

[Read More]


19 June 2019

Aceinna’s MCx1101 family of current sensors now supports 3.3 Volt applications. These highly accurate, wide bandwidth AMR-based current sensors are now available for a wide range of ADC and microprocessor based power systems and applications. Units are now available for sampling and volume shipments.

[Read More]


19 June 2019

Leading provider of sensors, Sensata Technologies is featuring its extensive range of pressure sensors and switches for use in boiler, pump and HVAC applications at Sensor + Test.

[Read More]


20 June 2019

Sensing and Instrumentation specialist Baumer has introduced a new range of optical miniature sensors which raise the standard of precisely detecting challenging objects across a wide range of applications.

[Read More]


05 April 2019

Manufacturer of 3D sensors for quality inspection and measuring technology, SmartRay has launched a new addition to its ECCO sensor family, optimally balanced for the diverse application requirements of consumer electronics manufacturing. 

[Read More]


15 April 2019

EGE offers to configure level controllers with guided microwave according to customer specifications.

[Read More]


12 February 2019

EGE now offers IECEx-certified signal processing units for the growing range IECEx-approved two-wire sensors.

[Read More]


09 January 2019

Reported to set high standards for process reliability and longevity, new robust and flexible ultrasonic sensors from Baumer for distance measurement and object detection are available in two designs; the cubical U500 and cylindrical UR18 with both options characterised by a robust housing and hermetically sealed sensor elements to withstand extreme environments.

[Read More]


22 November 2018

Balluff offers a self-adhesive, capacitive sensor head with IP 64 protection for non-contact, continuous level detection on non-conductive vessel or pipe outer walls made of glass, plastic or ceramic.

[Read More]


12 November 2018

Users of measurement sensors now have the opportunity to test Panasonic's HG-C series Laser Measurement Sensor free of charge.

[Read More]


04 October 2018

New from Carlo Gavazzi, the CA18CA and CA30CA Tripleshield capacitive sensor range features integrated IO-Link communication.

[Read More]


14 August 2018

A particular challenge when manufacturing miniaturised industrial photoelectric sensors is to combine both the optical and electronic components into one housing with a complex engineering solution. Panasonic is able to meet this challenge due to many years of experience in the development of photoelectric sensors for the automation industry.

[Read More]


09 July 2018

Curtiss-Wright’s Industrial division, the WM-H10 is a shaft-operated rotary position sensor featuring a solid-state, Hall-effect sensor that offers two independent and electrically-isolated outputs.

[Read More]


14 June 2018

In areas such as assembly automation for product verification and error proofing, tiny components can be seated on metal in a crowded area where detection is extremely difficult. The OGD Precision photoelectric sensor from ifm electronic has a light spot only 1mm across at 150mm, or 3mm at 300mm and still distinguishes the object from the background – so small, dark objects are detectable in the most arduous of positions.

[Read More]


1/5     (1 to 20 of 98)

FEATURES

16 October 2019

When temperatures rise above 100°C, most sensors are unable to cope, can fail after a short period of time and frequently have to be replaced. Addressing this are flow and temperature sensors specifically designed for high-temperature applications, for example FlexFlow thermal flow sensors available from Baumer

[Read More]


19 February 2019

Venturing into the great outdoors has always been a frontier too far when it comes to agreeing an internationally-recognised Technical Standard for safety solutions that use sensors and sensor systems to detect people in the open air, writes Dr Martin Kidman

[Read More]


SPONSORED CONTENT

1/2     (1 to 15 of 16)

16 July 2015

The POSIROT® range of PRAS (Analogue) and PRDS (Digital) Rotary Sensors are based around a contact free,
magnetically coupled encoder device which has been developed to work in rugged and harsh environments.

[Read More]


26 October 2017

Industry 4.0 is the digitisation of production and logistics - intelligent sensors are a crucial element. SICK provide dynamic and real-time-optimised processes now, for the future.

[Read More]


16 July 2015

The POSITILT® range of PTAM (Analogue) and PTDM (Digital) inclinometers use MEMS technology as the operating principle for the Tilt Sensors which are available in a wide range of housings offering either single or dual axis outputs.

[Read More]


11 August 2017

Workpiece touch probes are essential to series production, tool making and mould making.

[Read More]


10 February 2015

The POSIWIRE® series of fully submersible wire draw sensors offer up to 10000mm of linear measurement for the toughest of environments including OFF-SHORE and OFF-HIGHWAY vehicle applications.

[Read More]


16 July 2015

The NEW POSITAPE® range of rugged Tape Extension Sensors offers up to 20000mm of linear measurement
for the harshest environments, particularly MOBILE WORKING MACHINE & OFF-HIGHWAY vehicle applications.

[Read More]


26 October 2017

SICK’s inductive, capacitive and magnetic proximity sensors offer a long service life, extreme ruggedness and the utmost precision - providing non-contact detection of a wide variety of objects and media.

[Read More]


26 October 2017

Whether it's pressure measurement, temperature measurement, level control or flow metering – SICK offers a wide range of solutions for measuring liquids, gases and bulk solids.

[Read More]


10 November 2017

SICK Encoders and inclination sensors enable precise and effective speed measurement and position detection –turning received signals into data and sending to a process controller/cloud.

[Read More]


26 October 2017

Linear and rotary motor feedback systems with interfaces for the future provide commutation, position and speed measurement in a single device.

[Read More]


26 October 2017

SICK’s magnetic cylinder sensors offer the highest level of accuracy and control for pneumatic and hydraulic cylinder position monitoring.

[Read More]


26 October 2017

SICK offer all the choices for identification solutions – RFID, Laser-based bar code scanners and image-based code readers – so you can pick the best solution for you.

[Read More]


26 October 2017

SICK’s 2D and 3D vision cameras can be used to solve a wide range of applications where there is a need to measure, locate, inspect and identify.

[Read More]


16 July 2015

The POSICHRON® product family offers a wide range of non-contact linear sensors in various profile styles to suit many different applications. Units are available up to a stroke length of 5750mm for all profile types including “In-Cylinder” solutions.

[Read More]


26 October 2017

Unlike fences and doors, opto-electronic protective devices do not disrupt handling or material transport. SICK's comprehensive portfolio is ideal for hazardous point protection, access protection, and hazardous area protection.

[Read More]


1/2     (1 to 15 of 16)

VIDEOS OF THE MONTH