- Register

 
 

Home >MACHINE BUILDING & ENGINEERING>Machinery
PRODUCTS & SERVICES

1/2     (1 to 20 of 29)

03 May 2022

METROLOGY PROVIDER, The Sempre Group has been appointed to Renishaw’s Channel Partner Programme to help original equipment manufacturers (OEMs) access high-quality co-ordinate measuring machine (CMM) and gauging systems.

[Read More]


11 April 2022

SPARKS CAUSED by a lack of electrostatic dissipation can lead to expensive machines and system failure, and in the worst case can lead to explosions. To increase protection, igus has introduced a dissipated version of its lubrication- and maintenance-free xiros support roller made from stainless steel.

[Read More]


22 February 2022

OLDHAM-BASED GM Group will make its MACH debut appearance, introducing the Victor Vturn-A20YCM and the Vturn-S26/60CM single spindle turning centres as well as the compact Vcenter-P76 machining centre.

[Read More]


18 January 2022

EASY TO set up with a range of parameters to communicate the real-time operational and maintenance status of machinery, SICK claims to have reimagined the industrial light stack as a versatile and customisable Smart Light Tower

[Read More]


09 November 2021

TWO NEW modular belt solutions from Habasit are reported to bring new possibilities for industrial packaging applications, particularly in applications where space is at a premium.

[Read More]


06 September 2021

The task of machining enclosures, housings and mounting plates takes switchgear manufacturers a lot of time if they have to carry out the work by hand. Taking care of all work in a single pass, Rittal's Perforex MT automated machining centre has an automatic tool changer and tool magazine that can hold up to 21 tools.

[Read More]


06 September 2021

BRUNEL ENGRAVING has reported a significant growth in demand from the control panel manufacturing industry following investment in specialist state of the art engraving equipment.

[Read More]


14 August 2019

When power distribution specialist Burnell Switchgear and Control needed help with increasing productivity to cope with its fast-growing order book, the company approached EPLAN for advice. The EPLAN engineers soon discovered that not only would EPLAN Pro Panel CAE software deliver big savings in engineering and design time, but a Rittal Perforex fully automated machining centre would bring equally significant time savings for production operations.

[Read More]


19 June 2019

New from Eclipse Magnetics is a high intensity hopper magnet designed for the plastics processing industries. Available in both easy clean and fixed options, the hopper guard can be used in most powder or granulate applications to remove ferrous and para-magnetic contamination, including sub-micron sized particles.

[Read More]


20 February 2019

ATM Automation has recently expanded its range of welding equipment for the automotive industry to includes a single point robotic welder with sliding nests and hot air cold stake (HACS) machine with poke yoke checks.

[Read More]


11 January 2019

The Infradry Compact is a new high performance infra-red (IR) dryer module for a wide range of water-based inks and coatings from Heraeus Noblelight. It combines high power density infra-red heating with controlled air introduction and extraction to provide effective and efficient drying.

[Read More]


13 September 2018

Growing demand for high precision laser marking across a diverse range of components was the catalyst for the EMP Tooling Services’ most recent purchase, a new FOBA Laser marking system with the latest “Point & Shoot” technology.

[Read More]


01 March 2018

The Eclipse Magnetics stand at MACH 2018 will feature a variety of high performance magnetic filtration products, as well as an extensive range of electromagnets, magnetic workshop tools, welding aids, and workholding and lifting products.

[Read More]


11 January 2018

A custom-built, short wave infra-red oven from Heraeus Noblelight is helping to facilitate the manual fitting of fuel pipe hoses to the Jaguar XJ at Jaguar Land Rover's Castle Bromwich manufacturing site.

[Read More]


03 January 2018

Addressing increasing trends towards customisation and small batch sizes as well as the need for safety and ergonomics MiniTec's new modular aluminium profile based manufacturing line concept features interfaces that link the manufacturing to the ERP system, ensuring the correct documentation and work instructions are available for each order.

[Read More]


16 August 2017

Two gas catalytic ovens from Heraeus Noblelight have been installed at Life Fitness in Illinois, USA, where they are helping to double production and save costs in the manufacture of gym equipment.

[Read More]


15 August 2017

A carbon infra-red (IR) system from Heraeus Nobleight is helping Lohmann Technologies UK to achieve accurate control over adhesive activation temperature – an essential stage in the production of specialist tape. It is incorporated in an Elite Cameron laminating machine from TS Converting.

[Read More]


29 June 2017

The new solid reflector infrared module (SRM) from Heraeus Noblelight can significantly speed up heating or improve quality in the processing of thin and sensitive materials such as textiles or tissues.

[Read More]


29 June 2017

Applications with increased lateral offset can produce a strong transverse load on the drag chains and a flexible driver connection is required to compensate for inaccurately aligned channels or possible wear on the rollers.

[Read More]


16 June 2014

A new range of point-of-use adsorption dryers called the Atacama range has been introduced by compressed air specialist, Hi-line Industries.

[Read More]


1/2     (1 to 20 of 29)

FEATURES

08 March 2022

Taking place 4-10 April at the NEC, Birmingham, MACH 2022 is set to feature the largest display of new machinery and manufacturing technologies under one roof in the UK for four years

[Read More]


15 March 2022

£16.7 MILLION of UK Research and Innovation (UKRI) funding is going to build the manufacturing capability Britain needs to lead the green electric revolution. The funding will be divided among 10 different projects based around the UK, each aiming to help develop the self-sufficiency of Britain’s power electronics, machines and drives (PEMD) supply chains.

[Read More]


SPONSORED CONTENT

1/1     (1 to 11 of 11)

12 January 2017

Material-flexing disc couplings with disc elements. Motor, engine and turbine-driven applications.

[Read More]


12 January 2017

Lightweight, advanced composite material design. Customized per specific applications.

[Read More]


12 January 2017

The 400 Series has been designed to meet the need for a high-and low-speed, free-wheeling torque limiter.

[Read More]


11 August 2017

From the simple and compact TNC 320 to the sophisticated TNC 640, there’s a HEIDENHAIN machine tool control for any application.

[Read More]


12 January 2017

A replace-in-place designed coupling for quick installation and replacement.

[Read More]


12 January 2017

Mechanical-flexing couplings with T-Grid design for general purpose applications.

[Read More]


12 January 2017

The 820 Series has been designed using the modular principle to accommodate high-torque, high- and low-speed applications with the flexibility to accommodate a wide range of torque settings.

[Read More]


12 January 2017

The original Autogard Torque Limiter with a trusted design that will disengage at a pre-set torque value.

[Read More]


12 January 2017

Mechanical-flexing couplings with triple-crowned teeth. High-speed and high-torque applications.

[Read More]


12 January 2017

A general purpose coupling offering easy installation and a wide range of shaft gaps.

[Read More]


12 January 2017

Torsionally soft, split-in-half, easy-maintenance coupling ensures on-site adjustability.

[Read More]


1/1     (1 to 11 of 11)

VIDEOS OF THE MONTH