 |
23 January 2023
|
|
If you're a manufacturer and looking to use automation to overcome human resource scarcity, reduce cost of manual labour, ensure 100% traceability, and continuously improve focus in Manufacturing - then Brady are here to help!
[Read More]
|
|
|
 |
26 October 2022
|
|
SEMICONDUCTOR FABRICATION creates a number of waste gases, which can be corrosive, pyrophoric and potentially explosive. Often, diluting these gases with nitrogen (N2) is an early step in the abatement process. However, the use of nitrogen can cause condensation and deposits, as well as leak out of the system.
[Read More]
|
|
|
 |
11 May 2022
|
|
Distributed by Switchtec, Sirena’s P50 range of audible and light indicators have been engineered for automation and installation on high end electrical panels. They are based on a multichannel technology, which allows different levels of alarm via independent electrical contacts.
[Read More]
|
|
|
 |
04 January 2022
|
|
By 2025 the electrical vertical take-off and landing market (eVTOL) is projected to be worth $524 million and is anticipated to more than triple to $1.9 billion by 2035. With such a huge growth curve on the horizon, at Southern Manufacturing & Electronics 2022, technical moulding, tooling and assembly specialist Broanmain Plastics will showcase its precision manufacturing prowess.
[Read More]
|
|
|
 |
18 January 2022
|
|
EASY TO set up with a range of parameters to communicate the real-time operational and maintenance status of machinery, SICK claims to have reimagined the industrial light stack as a versatile and customisable Smart Light Tower
[Read More]
|
|
|
|
02 October 2018
|
|
As part of its process producing outdoor LED light fittings to meet IP66 requirements, TRT Lighting uses a bespoke FIPFG (Form in Place Foam Gasket) service from techsil where a six axis robot dispenses a single-component liquid polyurethane foam bead onto a substrate. The PU cures forming a fine, uniform, closed cell foam structure.
[Read More]
|
|
|
|
23 April 2018
|
|
An infra-red system from Heraeus Noblelight has dramatically reduced energy costs in the coating of board for food packaging at the Stroud factory of The Olympic Varnish Company. By eliminating the use of steam, the new system has also reduced board spoilage caused when there are unanticipated line stoppages.
[Read More]
|
|
|
|
01 February 2018
|
|
A custom-built, fast response medium wave (FRMW) infra-red heating system from Heraeus Noblelight is helping in the production line fitting of sound-deadening pads to the Jaguar F-TYPE at Jaguar Land Rover's manufacturing site at Castle Bromwich.
[Read More]
|
|
|
|
15 October 2014
|
|
Process heating solutions based on infra-red and Xenon flash lamp technologies will take centre stage on the Heraeus Noblelight stand.
[Read More]
|
|
|
|
06 October 2014
|
|
The HBP (Hi-line Blower Programme) range of adsorption air dryers are manufactured in the UK and feature zero loss operation as well as touch-screen technology. They are supported by a service network which provides full UK coverage with trained engineers.
[Read More]
|
|
|
|
03 September 2013
|
|
Depending on the substrate material and the quality requirement, laser marking can involve engraving, ablation, tempering, colouring and foaming. The TRUMPF TruMark range is said to meet all these marking needs with its standalone and OEM systems.
[Read More]
|
|
|
|
02 November 2012
|
|
A new catalogue from enclosure specialist Schroff provides detailed information on the comprehensive range of industrial air conditioners and heat exchangers manufactured by McLean Cooling Technology, one of Schroff ’s sister companies within the Pentair Technical Products Group.
[Read More]
|
|
|
|
25 September 2012
|
|
Precision cold forming and engineering company, Dawson Shanahan, in partnership with Asahi Diamond Industrial, has perfected a production process for the precision grinding of small component parts
[Read More]
|
|
|
