 |
Charlotte Stonestreet
Managing Editor |
| Home> | CONTROLS | >PLCs | >Safety-related PLCs for Profisafe |
| Home> | CONTROLS | >Safety | >Safety-related PLCs for Profisafe |
Safety-related PLCs for Profisafe
22 April 2024
THE NEW AXC F XT SPLC 3000 safety controller from Phoenix Contact can be operated as a left-side extension module on the PLCnext Control AXC F 2152 and AXC F3152 devices. It extends the PLCnext portfolio with a powerful safety PLC for Profisafe devices in Profinet networks.
The safety controller can be used in applications up to safety category SIL 3 in accordance with IEC 61508/61511 and PL e in accordance with EN ISO 13849-1.
In operation, the SPLC 3000 can communicate with up to 300 F-Devices as an F-Host and simultaneously act as an F-Device. The safety controller is fully integrated into the open PLCnext Technology ecosystem and provides a high degree of modularity in combination with the Profisafe I/O extensions of the Axiobus, which can be aligned on the right-hand side. The high-performance and redundantly designed ARM-based safety-related CPUs have a clock rate of 800MHz for channel 1 and 600MHz for channel 2.
- Speed starter with intuitive operation
- Configurator for individual marking of marking materials
- High power for panel mounting
- Turn on to Phoenix Contact switching offers!
- Surge protection with an overall width of 3.5mm
- UL-approved CAN networks
- Phoenix Contact participates in OPC UA initiative
- Save time with Push-X technology
- Thermal device circuit breakers
- Phoenix Contact acquires iS5 Communications
