- Register

 
 

Home >POWER TRANSMISSION>Gear Drives
PRODUCTS & SERVICES

1/1     (1 to 11 of 11)

14 August 2018

With constant smooth power transmission and reliability as key factors norelem has launched its new range of bevel gears and worm drives, developed to be maintenance-free for design engineers and manufacturing managers.

[Read More]


22 January 2018

A new range of shaft-mounted gear units with high load carrying capacities, increased efficiency, quiet running and reliability has been launched by Renold Gears.

[Read More]


12 February 2015

When an Australian provider of overhead cranes, Modular Cranes, needed to to synchronise a new bridge crane with two existing units, NORD Drivesystems configured the drives keeping in mind the end-users budgetary requirements.

[Read More]


27 December 2014

Mclennan has launched a new planetary brushed DC gearmotor range from the Italian small motor specialists Micro-Motors. The PS150 is a compact 30mm diameter precision grade gearmotor with a 12 or 24 V DC nominal voltage rating and is available in a choice of 13 gear ratios from 3.4:1 to 87.7:1.

[Read More]


27 September 2013

Redex has enhanced its solutions for turning tables on large vertical lathes. The latest MSR drive designs have been refined using the newest generation of drive and control systems from Siemens CNC or Fanuc.

[Read More]


04 July 2013

Designed to provide ultra-high torque in a compact package, the new worm gearbox drives from Astrosyn International Technology produce high output torques of up to 17Nm.

[Read More]


29 April 2013

Featuring new advanced hypoid gear technology with maximum power density, Olsen Engineering UK has introduced the Bison PowerSTAR right-angle gearmotor.

[Read More]


02 May 2013

New from NORD Drivesystems is a range of worm gear units in a robust, one-piece Unicase housing in five sizes with a maximum torque of 427Nm.

[Read More]


14 March 2013

In the past rack and pinion drives were generally developed from a planetary gearbox with a pinion fitted to the output shaft and the matching gear rack, but the radial moment load on the gearbox from the rack and pinion is typically the factor that actually determines the size of the gearbox required.

[Read More]


15 January 2013

Nord Drivesystems has expanded its Nordbloc SK Industrial Gear Unit range with four new smaller sized models with a choice of helical or bevel-helical gear stages.

[Read More]


22 October 2012

Kinetic sculptor and mechanical artist, Tom Wilkinson, has specified a Parvalux SD38MWS geared unit with inverter drive for his latest piece, commissioned by OMEGA, official timekeepers for the London 2012 Olympic Games.

[Read More]


1/1     (1 to 11 of 11)

FEATURES

04 January 2017

When selecting a gear drive solution, the obvious choice is not necessarily the most appropriate. Here, we offer an overview of typical gearbox arrangements together with a recent case study from Brevini UK whose engineering expertise helped solve a long-term odour problem

[Read More]


30 September 2013

Bearings for modern industrial drive systems must deliver efficient and reliable performance even in the most demanding of environments. This is reflected in NSK's focus on continuously improving solutions.

[Read More]


03 July 2013

Designed for automation and robotics, servo drives are used for many different applications. This results in a variety of torque and backlash requirements for the gear units. Other high priority factors are power density, endurance and noise level.

[Read More]


15 March 2013

Nord Drivesystems has expanded its Nordbloc SK industrial gear unit range with four smaller sized models with a choice of helical or bevel-helical gear stages

[Read More]


15 March 2013

Marine deck machinery has to work in harsh environmental operating conditions, and take up the least amount of space. Ships work in many varied locations during their life and equipment, including the gear units, must be able to withstand the extremes of temperature and salt water

[Read More]


02 November 2012

Drives manufacturer Stober has joined forces with New Jersey-based rack specialist, Atlanta, to develop a compact, efficient rack-and-pinion drive system with a built-in output bearing housing

[Read More]


02 November 2012

Renewable energy – energy which comes from natural resources – contributes around 16% of global final energy consumption. New renewables (small hydro, modern biomass, wind, solar, geothermal, and biofuels) account for just 3%, though are growing very rapidly

[Read More]


SPONSORED CONTENT

20 September 2017

NORD fulfils all of the current efficiency regulations and supplies a wide range of energy saving motors for the international market, with which operating costs can be considerably reduced.

[Read More]


08 April 2013

When a Welsh based Steel works required an upgrade of the roller table gearboxes on their casting production line, they turned to Rossi Gearmotors UK. Rossi have an unrivalled experience and reputation in supplying OEMs and end users, within the global metal manufacturing industry. Majority of the world's largest steel producing companies have Rossi products installed on their machinery, in various arduous applications either via OEM equipment or via retrofitting equipment upgrades.

[Read More]


09 May 2017

H-Fang Brand Slewing Solutions. Cone Drive’s slewing drives employ precision motion technology that provides a large ratio in a single stage of gearing.

[Read More]


09 May 2017

Accudrive Product Family. The breadth of products within the Accudrive product family, will exceed the most demanding needs in motion control applications.

[Read More]


09 May 2017

Precise and powerful custom solutions. Cone Drive is the world leader in double-enveloping worm gear technology.

[Read More]


20 September 2017

Professional expertise, efficiency and high productivity are the basis for extremly short delivery times trough our worldwide service network.

[Read More]


09 May 2017

Powerful, Clean Solutions with a Stainless Reputation. Cone Drive’s stainless steel precision motion gearboxes are designed for sterile manufacturing environments.

[Read More]


09 May 2017

High Torque. High Precision. Our Power Transmission Solutions are designed with torque in mind.

[Read More]


13 March 2015

With the newly designed SMS KL helical bevel gear unit in sizes 1 and 2, STOBER now has compact right-angle drives which meet the requirements of the packaging machine manufacturing industry for modern, space-saving actuator engineering.

[Read More]


08 May 2017

Cone Drive Harmonic Solutions® (also known as strain wave gearing) offer the ultimate in precision motion control technology.

[Read More]


VIDEOS OF THE MONTH