- Register


Home>DRIVES & MOTORS>Linear Actuators>Tubular linear motors

Tubular linear motors

12 August 2016

At the PPMA Show, with the emphasis on the ‘All Electric / Servo Machine’, Dunkermotoren will be presenting its range of motors to support this trend, including tubular Linear Motors to replace pneumatic actuators providing higher throughput, less maintenance, longer life and lower running costs.

Other products exhibited include a variety of motors suitable for use in automatic format adjustment. These enable fast and easy changeovers to reduce downtime, provide extra flexibility during production and ultimately contribute to reduced inventory and operating costs.

Of particular interest will be the tubular linear motor the ST11 actuator which is ideal for stand-alone applications such as rejecters and diverters. The unit features an integrated controller option that provides machine builders and designers with the benefits of easy integration, significantly reduced and simplified wiring. It features a range of analogue and digital inputs and outputs, with CAN, Profius and EtherCAT communications protocols available as standard. Once programmed only power is required to operate in stand-alone mode, with programming completed using Dunkermotoren’s own proven and stablished Drive Assistant.

The controller mounts easily with all models in the ST11 series and maintains a combined IP67 rating with the motor although can also be positioned away from the motor in the same way as a conventional controller. This ensures optimum flexibility along with the advantages of a single-source of supply for all your motion and control needs.

Although ideally suited for use in a wide range of motion control applications, being faster than stepper motors with ballscrews and more precise than belt-drive systems, the ST11 with Integrated Controller is particularly ideal for replacing pneumatics in all-electric machines due to its efficient, low-maintenance and environmentally sound features.

Saving space, reducing overall design and assembly time whilst improving performance are familiar objective for designers, so the new BG45SI brushless DC motors from Dunkermotoren will also be of interest. The length of the BG45x15SI has been reduced from 120mm to 88mm and the length of the more powerful BG45x30SI reduced from 135mm to 103mm, whilst maintaining the same power, torque capabilities and motor efficiencies. These compact and integral sub-100 watt power motors offer high power density combined with true 4-quadrant digital speed control. The motor connector design has also been modified to ensure further space saving and convenience in mounting and connection.

With a 12 or 24 volt power source at a nominal speed of 3000 rpm, the longer of the two units, the BC45x30SI is continuous duty rated for 80 watts power output. These motors can achieve peak powers of four times the continuous duty rating and therefore a starting torque of up to 100 Ncm is possible. Stand E24