- Register

 
 

Home >DRIVES & MOTORS>DC Motors
PRODUCTS & SERVICES

1/2     (1 to 20 of 26)

17 January 2022

NEW FROM Oriental Motor, the BLV-R Series of low voltage input power DC motors is based on the company's BLV series and features enhancements specifically designed to make them a cost-effective solution in AGVs and AMRs.

[Read More]


 border=
13 May 2021

NASA'S INGENUITY helicopter has successfully completed its pioneering flight on Mars. This is the first time in the history of powered, unmanned spaceflight that a device has flown in a controlled manner on another planet. The helicopter features DC motors from maxon, that have been modified for this challenge.

[Read More]


 border=
13 May 2021

PORTESCAP HAS launched an online product recommendation tool for its brush and brushless DC motors. The Portescap MotionCompass enables users to input the operating points and key parameters – as well as requirements for gearboxes and position feedback – then provides a prioritised list of the different products that meet the needs of the application.

[Read More]


 border=
11 November 2020

PORTESCAP HAS introduced the latest addition to its Ultra EC mini brushless DC motor platform – the 16 ECP brushless motor with a new integrated driver. New 16mm diameter motor versions are available in 2 lengths (36mm and 52mm).

[Read More]


 border=
13 September 2018

Motion Control Products has introduced a new range of Coreless DC motors that, says the company, have some distinct advantages over standard DC motors. These include longer life expectancy, light weight, high acceleration, less vibration, less noise and operation at very low speeds.

[Read More]


 border=
18 June 2018

Panasonic has expanded the MINAS A6 servo drive series with the MINAS A6V – a low voltage, high performance version of the Minas A6 Series servo drive system for operation with input voltages of 24VDC or 48VDC.

[Read More]


 border=
29 June 2017

A brushless DC motor has been designed by Printed Motor Works for use in dynamic vehicle testing. The high power-density motor is part of a steering robot developed by Anthony Best Dynamics.

[Read More]


 border=
15 February 2017

Featuring a proven energy efficient coreless design with an optimised self-supporting coil and magnetic circuit which enables higher performance in a compact 17mm diameter size, Portescap has expanded the DCT range of Athlonix Brush DC motors with the introduction of the 17DCT brush DC mini motor.

[Read More]


 border=
13 October 2016

Available through Mclennnan, Portescap’s new 22ECP series brushless and slotless miniature motors feature optimised speed/torque performance characteristics in two length versions with 80 or 120W continuous output power.

[Read More]


 border=
07 June 2016

Reported to be ideal for controlling DC motors used in heavy industry applications such as metal working, steel mills, mining, or the cement, rubber and plastics industries, Sprint Electric has extended is range PLX of digital DC drives up to 2250 Amps.

[Read More]


 border=
21 April 2016

Portescap’s new high torque 24DCT miniature motor features an energy efficient coreless design with optimised self-supporting coil and magnetic circuit which ensures higher performance is delivered, all in a compact 24mm diameter size.

[Read More]


 border=
11 April 2016

In response to constant pressure for smaller, lighter products, which offer maintained or improved performance, precision motion control specialist Dunkermotoren has developed a brushless DC motor that incorporates not only the power supply, but also the control and positioning electronics, PLC functions, BUS links along with various encoder and brake options.

[Read More]


 border=
21 July 2015

RS Components now offers a selected range of Faulhaber products, including DC micromotors, brushless DC servomotors, DC geared motors and speed controllers.

[Read More]


 border=
18 June 2015

A new, compact brushless DC motor which provides 1100W of output power continuously and which can be overloaded by up to four times is the latest addition to Dunkermotoren's rotary brushless motors.

[Read More]


 border=
20 April 2015

Astrosyn International Technology has delivered the first of a new design of high shock rated permanent magnet DC motor for a hydraulic application in an all-terrain vehicle.

[Read More]


 border=
18 September 2014

A partnership between motor manufacturer, maxon motor uk, and Saeed Mohan, a post-graduate student at the University of Reading has developed an exciting new green material from food waste.

[Read More]


 border=
20 April 2014

Using two brushed DC motors from maxon motor, prosthetic specialist Endolite has developed a new award winning foot and ankle system that is set to revolutionise amputees walking abilities.

[Read More]


 border=
08 April 2014

A new ultra-compact brushless DC motor measuring just 22mm in diameter and weighing only 63g, which is said to deliver exceptional power to size and weight ratio, has been added to the established range of brushless DC motors available from DUNKERMOTOREN.

[Read More]


 border=
04 February 2014

Ten years ago, the NASA rovers Opportunity and Spirit landed on Mars. NASA chose maxon motor to supply the 39 brushed DC motors that enable each robot to navigate the surface. Opportunity is still exploring the planet, an extraordinarily long time considering the robot was designed for a service life of only 90 days.

[Read More]


 border=
09 January 2014

The compact and lightweight MICROPUMP range of magnet drive pumps are now available with all-new electromagnetic brushless DC motors which provide increased torque and power for liquids handling applications requiring higher flow rates.  

[Read More]


1/2     (1 to 20 of 26)

FEATURES

17 September 2024

THE DEMAND for hand-held surgical power tools is at an all-time high due to significant surgical procedure backlogs and rising calls for elective and cosmetic surgeries.

[Read More]


10 May 2024

FOR DESIGN applications that depend on motion, whether that’s a robot, a surgical power tool, or a satellite control system, miniature DC motors are commonly used thanks to their performance and compact footprint.

[Read More]


18 April 2024

Dipak Mane explains the importance of slot and pole selection for BLDC motor design

[Read More]


09 November 2023

As the latest generation of surgical power tools enable even greater capabilities to improve patient outcomes, there’s an increased need for their designers to consider the motion system that drives them, reports Nicole Monaco

[Read More]


17 February 2022

THE UK has had its fair share of supply chain issues over the past 18 months, from toilet paper panic buying to the dreaded pingdemic. Right now, a shortage of workers seems to be the crux of the issue, to which robotics could provide a solution. Stewart Goulding, managing director at precision drive system supplier EMS, explores how robots could enable an entirely automated supply chain.

[Read More]


 border=
15 July 2021

DESIGNERS OF motion systems can face challenges when selecting or developing PWM electronics to drive Brushless DC motors. Matthieu Bouat discusses the parameters to consider when developing the electronic control aspect of the motion system, particularly where factors such as battery life and the overall size and weight of the package are key concerns

[Read More]


 border=
11 June 2013

Don’t resign yourself to hefty bills when it comes to power consumption you can cut costs and boost efficiency in electric motors by looking at the bigger picture and taking a systems approach, says Phil Burge of SKF

[Read More]


SPONSORED CONTENT

1/1     (1 to 14 of 14)

 border=
04 April 2017

Alongside their single and three phase high powered motors, Tecnotion, the linear motor specialist, offers a selection of both iron core and ironless motors for low voltage purposes.

[Read More]


 border=
08 February 2013

Special Executions

[Read More]


 border=
04 April 2017

OEM Automatic are pleased to announce we are now the UK agents for Aplisens who manufacture Smart field devices for pressure, differential pressure, level and temperature.

[Read More]


 border=
15 February 2013

When searching the web for a suitable industrial gearbox and geared motor repair centre within the UK it appears that the customer is spoilt for choice. However Rossi UK believe that very often, this choice is limited, as many of these repair centres are not authorised by the OEM and therefore the repair is carried out at higher risk to end user and could lead to incurring additional costs.

[Read More]


 border=
04 April 2017

The 319 series comprises of a low voltage, permanent magnet DC motor with worm gearbox developed for a compact, low noise and cost effective solution to suit many applications.

[Read More]


 border=
15 February 2013

The prestigious Formula Renault 3.5 series has become an important feeder championship for Formula One in recent years with a string of current F1 racers having graduated from Renault’s ranks. Scuderia Toro Rosso drivers Jean Eric Vergne and Daniel Ricciardo, and reigning World Champion Sebastian Vettel are all products of Formula Renault 3.5.

[Read More]


 border=
15 February 2013

Maxi in the matter of performance, control properties, and range of functions. Mini as far as price, size, and commissioning are concerned for brushless DC motors.

[Read More]


 border=
04 April 2017

Cable entry system KDSClick The system has a modular design, consisting of only three types of basic components: frames, inlays and sealing sleeves.

[Read More]


 border=
15 February 2013

More than 50 brushless dc motors, gearheads and controllers from maxon motor are responsible for the humanoid's precision movements.

[Read More]


 border=
04 April 2017

Datalogic’s Matrix 120™ is the smallest ultra compact industrial 2D imager on the market (23mm x 31mm x 45mm), along with small dimensions it also offers the flexibility of embedded Ethernet/Serial or USB/Serial connectivity.

[Read More]


 border=
04 April 2017

IDEM's extensive range of Solenoid Locking Tongue Safety Switches have been designed to provide robust position interlock detection for moving guards and provide a lock mechanism to keep the guard closed until the hazard has been removed.

[Read More]


 border=
04 April 2017

OEM Automatic represents the prestigious Anderson Negele Brand to support the food, beverage, dairy and pharmaceutical industries with regard to hygienic instrumentation.

[Read More]


 border=
04 April 2017

Our Industrial instrumentation products focus on components that measure and control the pressure and flow of liquids and gases.

[Read More]


 border=
04 April 2017

The ECO range of signal tower from Auer offers high performance LED’s, excellent visibility and long lifetime but still at an attractive price.

[Read More]


1/1     (1 to 14 of 14)

VIDEOS OF THE MONTH